2022 PRO XS chassis with IMCA body.
What the Champions race in! $19,500
What the Champions race in! $19,500
Install your engine. Then go WIN!
What you get in Champion roller form.
2022 PRO XP chassis is with modlite body.
NEW for 2022.
2022 PRO XP chassis is with modlite body.
NEW for 2022.
* Front bumper new design.
* Nerfs new design.
* Rear bumper mounting points changed . No longer go under rearend..
* Front nose is now wider and stars legal.
* Choice of PRO or NXS front clip. NXS Front clip is bolt on front clip with forward
mounted lower control arms and uses NXS chassis Front spindles, hubs uppers and lowers are new design. The spindles use same winters QC hubs, bearing etc.. Uppers are more easily adjusted.
* Front nose is now wider and stars legal.
* Choice of PRO or NXS front clip. NXS Front clip is bolt on front clip with forward
mounted lower control arms and uses NXS chassis Front spindles, hubs uppers and lowers are new design. The spindles use same winters QC hubs, bearing etc.. Uppers are more easily adjusted.
* Pro Front clip is bolt on and main rails have been raised for better protection of motor. And is wider in nose in order to meet Stars rules.
* Steering rack is bolt on and can accept either 2 bolt front mount or 3 bolt bottom mount racks.
* Steering column is now able to be mounted directly in front of the driver and
is fully adjustable. Steering wheel can be moved front to back, left to right and
to fit the drivers prefernces.
* Trailing arm chassis bracket are bolt on and lengths are adjustable.
* Fuel cell is adjustable left to right.
* Smaller battery is used and is relocated.
* Tube on left rear added for forward of rear axle shock mounting.
* Welded in bolt for seat belt mounting makes it much easier to install belt.
* Steering column is now able to be mounted directly in front of the driver and
is fully adjustable. Steering wheel can be moved front to back, left to right and
to fit the drivers prefernces.
* Trailing arm chassis bracket are bolt on and lengths are adjustable.
* Fuel cell is adjustable left to right.
* Smaller battery is used and is relocated.
* Tube on left rear added for forward of rear axle shock mounting.
* Welded in bolt for seat belt mounting makes it much easier to install belt.
* Lower motor mount is bolt in, each motor has its own mount available. No more cutting out old mount and welding in new when you decide to change motor.
* All thrugh holes in 1 x 2 rectangular tubing are slugged for support and stops tube from being crushed.
* CHAMPION ROLLER $19,500
Complete all items listed in below Budget Plus roller form PLUS the following items.
Choice of Kirkey or Ultra shield seat we stock is full containment.
Driveshaft
Battery
Wiring for fan and battery,
All plumbing and brake lines and fitings for brakes.
Cooling lines and fittings up to motor.
Oil lines and fittings up to motor.
Shifter linkage choice of hand or foot clutch.
Throttle and clutch cable.
Standard QuickCar oil and water temp gauges.
Standard QuickCar ignition and Acc switch panel.
Standard QuickCar master disconnect.
All needed nuts bolts, washers, spacers to install parts.
We build is $19.500.
Custom options available at additional cost.
You will need an engine and all its components. Depending on motor and
what additional item you install onto the motor, you can expect to spend on
average another $4000 to make the car race ready.
And last is our service after the sale. We WILL make sure you have the parts and at a fair price, when they are ever needed. We stock over $250,000 of mod lite and dwarf car parts.
We Will help you on setup, the best we can.
We Will work to help you with any tech or support question you might ever have.